Battery State Indicator

CR1

The new CR-1 Battery Status Indicator from Shen Dian Enterprise LTD adds a simplified approach to the complexities of battery management. Designed for semi-permanent hardwiring to your vehicle, the CR-1 is a simple, easily accessible accessory that is suitable for current battery chargers using a 2 pin “Quick” connector. Simply install the ring connectors to the positive and negative terminals on your installed battery, mount the female plug connector in an accessible location and you will see an instant state of your battery charge levels in “real time” by reading the LED level indicators. When re-charging is required, connect the male end of the CR-1, then connect your battery chargers 2 pin connector and switch on your charger. When charging is complete, unplug the male connector and insert the rubber plug over the female end for IP-65 weatherproof protection. The LED indicators are designed to constantly flash as long as they are attached to a power source, drawing minimal power from the host battery. The CR-1 can be used in-line with any Shen Dian product using the “USA” connectors, including our new CPU 4000 power battery pack.

Specifications at a glance

• 1.5 Metre Cable Length
• 16 Amp max charging current
• 2 pin charging connector(compatible with our existing chargers
• Easy to read LED display indicator (Flat / Medium / Full)
• Weatherproof with IP 65 Rating
• Mounting hardware supplied